Home  Products  Company    Research and development    Contact    Work with us

ANALYZER 90 ANALYZER 90 ANALYZER 90. Reliable and robust semi-automated clinical chemistry 10 mm Flow Cell photometer. Flow-cell with Peltier controlled temperature. Standard configuration with 7 optical filters, wave length 340-400/700 nm. Mono and bichromatic reading systems. Its operating software runs and stores up to 200 tests. Reading system: End-Point, Fixed-Time, and Kinetic. Data processing with different calculation modes. Download brochure (pdf) Technical features Accuracy ± 1% from 0.000 to 1.500 OD ± 2% from 1.500 to 3.000 OD Stability 0.01 OD in 8 hours Light source halogen lamp Optical filters 340, 405, 492, 510, 546, 578, 630 nm Detector silicon photodiode Reading path 10 mm Flow-cell 80 µl Flow-cell temp room temp. 25/30/37° C ± 0.1° C Sample Aspiration automated sample aspiration through a precision peristaltic pump Sample volume minimum 350 µl Memory capacity 200 test and curves; the last 300 printable readings Reading system mono and bichromatic reading Fast reading for kinetic and fixed time Calculation Mode optical density, concentration, endpoint against standard or factor, fixtime against standard or factor, kinetic, non linear multi-standard curve up to 8 points, sample blank, reagent blank Calibration from 2 to 8 points curve Calendar/Timer associates time with the results; timer function Keypad 17 buttons Display 2 lines with 16 columns Printer 40 columns with thermal paper Interface RS232 serial port Warm up Time 15 minutes Power requirements 230/115 VAC, 50-60 Hz, 110 W Measurements 42 x 34 x 15 cm Weight 9 Kg